The PM4-IV2 is a panel mount dual bargraph display for two analog inputs. The bars are 32 red LEDs and each input can be individually configured for input type (4-20mA, 0-2VDC or 0-20VDC) and can be individually scaled. Setup is achieved with pushbuttons on the rear of the instrument. The displays can be configured to show a bar or a single dot indication The inputs are isolated from each other and the power supply |
 |
The PM4 panel mount range is available with a bargraph & digital display option. A typical PM4 with a bargraph display is shown here. The model featured is used to display contents with the digital display showing litres and the bargraph showing percentage. Please select the appropriate model by choosing the required input type from the: |
 |
The PM4 panel mount range is available with circular bargraph & digital display option. This type of display is especially useful for the display of wind speed & direction. The models for wind speed & direction display accept either 4-20mA inputs or a NMEA serial string: |
 |
The PM4 panel mount range is available with circular bargraph & digital display option. The display pictured is a generic display suitable for a tachometer display, valve opening display, Ammeter etc. Please select the appropriate model by choosing the required input type from the: |
 |
The TP40S-IV and TP40S-SG models are 200mm high, 40 segment LED bargraphs in IP65 environmentally rated wall mount enclosures. These displays are ideal where a quick visual indication is required over a distance. An optional panel mounting kit is available for these products. The TP40S-IV accepts a analog input and the TP40S-SG has the correct interface for a 4 wire strain bridge, loadcell, etc. Two relays are included as standard to allow high and low setpoints to be set. These setpoints can be used for alarm or control functions. |
 |
PM4-IV2 Brochure