RM3 Rail Mount Isolator/Transmitters

 

Please select here for information on AIC's range of: Serial protocol converters BCD/Binary/Gray Code to SSI converters ISOL4 4 channel 4-20mA to 4-20mA isolator
RM3-IV   DC mA or DCV to isolated 4-20mA retransmission Brochure	RM3-IV-LPI Loop Powered Transmitter/Isolator. This device is a loop powered transmitter with DC input ranges of 4-20mA, 0-200mV, 0-2V, 0-20V or 0-100V. Fully isolated 4-20mA retransmission with zero and span adjustments are available for all channels with 1, 2, 3 or 4 channel models available in the same compact case. Manual
RM3-AI   0-5A AC to true RMS 4-20mA isolated retransmission Brochure	RM3-AI-LPI Loop Powered Transmitter/Isolator. This device is a loop powered transmitter with AC input range of 0-5A. Fully isolated true RMS 4-20mA retransmission with zero and span adjustments are available for all channels with 1, 2, 3 or 4 channel models available in the same compact case. Manual
RM3-AV   0-250V AC to true RMS 4-20mA isolated retransmission Brochure	RM3-AV-LPI Loop Powered Transmitter/Isolator. This device is a loop powered transmitter with AC input range of 0-250V in preset ranges. Fully isolated true RMS 4-20mA retransmission with zero and span adjustments are available for all channels with 1, 2, 3 or 4 channel models available in the same compact case. Manual
RM3-RT-LPN RM3-RT-LPI   100 Ohms RTD input to 4-20mA retransmission Brochure	RM3-RT-LPN & RM3-RT-LPI RTD Temperature Transmitters. These devices accept 2 or 3 wire 100 Ohms RTD inputs. The RTD inputs are converted to a 4-20mA output signal. Models are available with 1, 2, 3 or 4 input/output channels - each channel has zero and span adjustment. The RM3-RT-LPN offers non-isolated outputs Manual The RM3-RT-LPI offers isolated outputs. Manual
RM3-SW-LPN RM3-SW-LPI   3 wire slidewire (potentiometer) to 4-20mA retransmission Brochure	RM3-SW-LPN & RM3-SW-LPI loop powered slidewire transmitter. This device accepts a 3 wire slidewire (potentiometer) input. The inputs are converted to a 4-20mA output signal. Models are available with 1, 2, 3 or 4 channels in the same compact case. Each channel has zero and span adjustments. The RM3-SW-LPN offers non-isolated outputs The RM3-SW-LPI offers isolated outputs. Manual

 

The RM3 DIN rail mount products offer high functionality. Up to 4 channels of isolation and retransmission can be fitted into one DIN rail enclosure. Convertor/transmitters are available for RTD temperature sensors, slidewire transducers, AC Volts, AC Amps and 4-20mA inputs. The products are 2 wire loop powered and a high degree of isolation between input, output and loop power is a feature of this range.